The application of thermal break aluminum windows in modern architecture is very extensive, widely recognized for their excellent insulation, soundproofing, and good wind resistance. However, if thermal break aluminum windows are leaking air, what should be done?
1. Profile Breakage:
During the manufacturing process of thermal break aluminum windows, if the quality of the aluminum profile frame declines or breaks, air leakage will occur. The name "thermal break" comes from its special manufacturing process, where the aluminum profile frame is broken in the middle, and the bridging part is connected with plastic, creating what is known as the "thermal break." This design helps to prevent cold and heat conduction, achieving energy-saving and soundproofing effects.
Solution: Repair or Replace
If the window is leaking air due to profile breakage or aging of the sealing strip, it should be repaired or the profiles and sealing strips should be replaced in a timely manner.
2. Installation Issues:
If the window is not installed according to the operation regulations during the installation process, such as not fixing it at the required points or using the wrong sealing strip, this will lead to air leakage.
Solution: Adjust Window Installation
After replacing the profiles or sealing strips, the fixed points of the window should also be reset to ensure a good fastening effect.
3. Aging of Sealing Strips:
Over time, windows may experience aging, deformation, or cracking of the sealing strips due to exposure to sunlight, rain, and other environmental factors, resulting in decreased sealing performance and air leakage.
Solution: Use Insulation Adhesive
Apply a layer of insulation adhesive on the window and then press the sealing strip in place to enhance the air tightness of the window and prevent air leakage.
4. Design Issues:
If the window design is unreasonable, it may prevent the window from sealing properly when closed, allowing air to seep through gaps.
Solution: Install Wind Deflectors
For air leakage issues caused by design mistakes, in addition to improving the design structure, wind deflectors can be installed on the inner side of the window to reduce air entry.
In summary, this is a brief introduction to what to do if thermal break aluminum windows are leaking air. Although thermal break aluminum windows significantly contribute to energy saving and enhancing comfort, the issue of window air leakage still requires sufficient attention. Regular maintenance, periodic inspection of the sealing, profiles, and fastening conditions of the window are essential measures to avoid air leakage. If air leakage occurs, damaged components need to be repaired or replaced promptly, and adjustments to the installation and design of the window should be made to ensure that it maintains good sealing performance, allowing the thermal break aluminum windows to exhibit their superior qualities.
