After purchasing a toilet, some people choose to install it themselves. The installation steps for a toilet can be divided into the following five steps. Here is a brief introduction.
How to Install a Toilet: A Comprehensive DIY Guide:
1、Product Inspection
Before installing the toilet, it's important to inspect it first. Check whether the distance from the floor to the wall matches the distance from the toilet outlet, and ensure that the drainage methods of the bathroom and the toilet are consistent. Also, check if the toilet has any damage from bumps, and verify that all related accessories have been included without any missing parts.

2、Floor Preparation
Begin by sweeping the dust off the floor to ensure it is clean and level. Next, remove the cap from the floor drainage pipe and pour a basin of water into the pipe to check for any blockages caused by mud or sand. If the drainage pipe is too high, you can use a cutting machine to trim it down; usually, the pipe should protrude about 1 cm above the floor.

3、Positioning and Marking
Use a ruler or similar tool to draw a central cross line at the drainage pipe location on the floor, then draw a central cross line at the toilet's waste outlet. When marking the cross lines, extend them a little, such as extending the toilet's central cross line to the outer wall of the toilet. Next, align the toilet's waste outlet with the floor drainage pipe and mark the outline of the toilet's base on the floor with a marker.

4、Toilet Installation
Start by placing the sealing flange on the toilet’s waste outlet, then apply a circle of silicone adhesive within the marked outline on the floor. Carefully align the toilet waste outlet with the floor drainage pipe and set it down. Alternatively, you can use screws to secure the toilet. Before installation, mark the drilling positions on the floor, use a drill to create holes, insert expansion plugs, place the toilet, and secure it with screws. Seal the base of the toilet with silicone adhesive all around.

5、Accessory Installation
First, install the angle valve at the water supply outlet on the wall, then set up the cistern's inlet and outlet valves, and connect the water supply hose between the cistern inlet and the toilet's water valve. Adjust the length of the screw for the cistern cover button, and place the cover on the cistern. Finally, install the toilet seat.

In summary:this is a brief introduction to how to install a toilet. I hope that after reading this, you can use it as a reference and help for future toilet installations. You may also consider hiring professionals for the installation. For more related information, please continue to follow Hawkrown.com.